Ｑ１．What kind of plastics can be converted to oil? |
Ａ. |
Recyclable plastics are polypropylene (PP), polyethylene (PE) and polystyrene
(PS).
Plastics should be clean before putting into the Blest Machine.
|
|
Ｑ２．What kind of oil is converted from plastics？ |
Ａ. |
Recycled oil can be used as fuel for boilers and incinerators and so on.
【In case of PP・PE】
PP and PE will be converted to oil, which contains gasoline equivalent,
kerosene equivalent, diesel equivalent and heavy oil. So, we call this oil "Mixed Oil".
.
【In case of PS】
PS oil does not contain gasoline equivalent, kerosene equivalent, diesel
equivalent and heavy oil.
PS oil contains styrenemonomer, styrene dimer and styrene trimer. PS oil
can be used as assitant fuel.
Or, if you purify PS oil, you can get Styrenemnomer rich, which is raw material for plastic.
So, if you need gasoline equivqalent or diesel equivalent, please process
PP & PE.
|
|
Ｑ３．What is a Hydrocarbon Oil Refiner? |
Ａ. |
We have BOR-20 and BOR-50.
【In case of PP・PE Oil (Mixed Oil)】.
The BOR-20 and BOR-50 are capable of refining batches of mixed oil into
Gasoline, Kerosene, Diesel Oil and Heavy Oil Equivalents.
We can not guarantee the above portion, because it depends on plastic materials.
The specification of each oil is not exactly equal to Japanese Industrial
Standards, nor equal to USA Standard Oil.
. |
|
Ｑ4．How about the portion of each refined oil?
Ａ. |
Averagely,
Gasoline equivalent : 15-20%
Kerosene equivalent : 20-30%
Diesel oil equivalent : 20-30%
Heavy oil equivalent : Remains.
|
|
Ｑ5．How much oil can oiling machine convert 1kg plastic waste to oil? |
Ａ. |
Averagely, 1Kg plastic waste is converted to 1 L oil.
It depends on plastic waste.
|
|
Ｑ6． Why cannot our system accept PETor PVC?
|
Ａ. |
1) Hydrogen chloride and Dioxin are generated in processing PVC.
2) The pyrolysis gas from PET will be sublimated under our operating temperature
range.
T/fore, you cannot get oil ( Liquid ) from PET.
Sublimation means solid - gas - solid , that is , no Liquid condition.
So, if you put some PET into our equipment, it can be solid in our equipment,
and makes operation trouble.
It is said that PET can be converted to oil at approx. 600℃. Our operating tempareture range is 400℃ - 450℃.
|
|
Ｑ7．What is maximum size？ |
Ａ. |
Our highest capacity model is B1200.
( 50Kgs/Hr X 24Hrs = 1,200Kgs/day ).
|
|
Ｑ8．Ｈｏｗ ａｂｏｕｔ gases or residue？ |
Ａ. |
The gases (Methane, Ethane, Propane, Butane and so on) is generated, as
we call them Hydrocarbon Gas.. But we install "Hydrocarbon Gas Filter"
into our machine, which decompose Hydrocarbon Gas into harmless materials
(Water and Carbon Dioxide).
The residual product remains in a residue tank and that portion is very
small, like a few percentage,
which depends on plastics waste.
|
|
|
|
Blest.co.Ltd.,